The scanner is pulling multiple papers through at once. What do I do?
If your scanner is pulling multiple pages through at the same time, the pad module is the most likely cause of the issue. Replacing the feed pad module will resolve the issue.
Related Articles
Why Isn’t the Scanner Pulling my Card/Document?
If your scanner is not automatically pulling your card/document when inserting into the scanner, verify that Auto Scan is turned on. The image below displays when Auto Scan is turned off: To turn on Auto Scan, click the Auto Scan button. You should ...
Can I use my license key on multiple computers?
No. Single purchased license keys may only be used on one computer at a time. If you need to change computers, you must first deactivate your license key before using it on another computer. To deactivate your license key, click on Advanced Settings, ...
No Power/Scanner Not Connected Error
If you received an error message that your scanner is not connected, there may be a problem with the driver. This can be caused by several factors, the most common being incorrect driver installation or incomplete driver installation. Below is a ...
How do I clean my sheetfed scanner?
Non-IX series scanners (excluding PS667ix): Lightly spray a lens cleaning solution on the cleaning sheet provided. If you do not have a spray, place a few drops of rubbing alcohol on the sheet. Open the AmbirScan Click on Settings in the left side ...
How do I calibrate my scanner?
To calibrate in AmbirScan, complete the following steps: Open AmbirScan. Deselect Auto Scan (Note: when deselected, circular arrows will be displayed on the button). Click on Settings on the left side menu. Insert your calibration sheet. Select ...